CAN

CAN sample code External connections/devices: - Power supply - CAN-Monitor by CAN - Analog or Switched voltage GND/Power on AIN1 (Analog Input) - DOUT1 (High side output) Used I/O: - LED - CAN-Transceiver - Analog input - Digital output Function: - Set up CAN baud-rate to 250kBit - Voltage at IN1 (V) will be send by the CAN (ID=0x3FF, DLC=1, Value in Byte 0) - if received value from CAN (ID=0x100, DLC=1, Value in Byte 0) greater than 5, the OUT1 will be Hight otherwise Low - LED toggle every 1...

CAN sample code External connections/devices: - Power supply - CAN-Monitor by CAN - Analog or Switched voltage GND/Power on AIN1 (Analog Input) - DOUT1 (High side output) Used I/O: - LED - CAN-Transceiver - Analog input - Digital output Function: - Set up CAN baud-rate to 250kBit - Voltage at IN1 (V) will be send by the CAN (ID=0x3FF, DLC=1, Value in Byte 0) - if received value from CAN (ID=0x100, DLC=1, Value in Byte 0) greater than 5, the OUT1 will be Hight otherwise Low - LED toggle every 1...

CAN sample code External connections/devices: - Power supply - CAN-Monitor by CAN - Analog or Switched voltage GND/Power on AIN1 (Analog Input) - DOUT1 (High side output) Used I/O: - LED - CAN-Transceiver - Analog input - Digital output Function: - Set up CAN baud-rate to 250kBit - Voltage at IN1 (V) will be send by the CAN (ID=0x3FF, DLC=1, Value in Byte 0) - if received value from CAN (ID=0x100, DLC=1, Value in Byte 0) greater than 5, the OUT1 will be Hight otherwise Low - LED toggle every 1...

CAN sample code External connections/devices: - Power supply - CAN-Monitor by CAN - Analog or Switched voltage GND/Power on AIN1 (Analog Input) - DOUT1 (High side output) Used I/O: - LED - CAN-Transceiver - Analog input - Digital output Function: - Set up CAN baud-rate to 250kBit - Voltage at IN1 (V) will be send by the CAN (ID=0x3FF, DLC=1, Value in Byte 0) - if received value from CAN (ID=0x100, DLC=1, Value in Byte 0) greater than 5, the OUT1 will be Hight otherwise Low - LED toggle every 1...