Timer

Sawtooth Generator This function block generates a sawtooth signal with a period of b in [s] and an amplitude h*π. The period b should be appreciably higher than the program cycle time. Signals Name I/O Type(s) Function h I FLOAT Amplitude b I FLOAT Period in [s] Y O FLOAT Output signal Comments The block is typically used to generate a test signal, e.g. in conjunction with a sine function block.

On-Delay This function block delays the positive-going edge of its input signal by a time given by Tv. The output Q will change to a logical 1 after a time Tv in seconds from a positive transition on P. The real delay time is the value of Tv rounded up to the next cycle; in practice this means that only delay times which are multiples of the cycle time can be realized. Tv is given as a float value, expressed in seconds. Tv may have a value smaller than one second, but not negative. A free-run...

Off-Delay This function block delays the negative-going edge of its input signal by a time given by Tv in seconds. The output Q will change to a logic 0 after a time Tv from a negative transition on P. The real delay time is the value of Tv rounded up to the next cycle; in practice this means that only delay times which are multiples of the cycle time can be realized. Tv is given as a float value, expressed in seconds. Tv may have a value smaller than one second, but may not be negative. A fr...

miCon-L function block "Clock Generator"